Designing Cisco Enterprise Wireless Networks (300-425 ENWLSD)

Here you have the best Cisco 300-425 practice exam questions

  • You have 244 total questions across 49 pages (5 per page)
  • These questions were last updated on February 13, 2026
  • This site is not affiliated with or endorsed by Cisco.
Question 1 of 244
A network engineer is preparing for an office site survey with a height of 2.5 meters. Which three components are recommended to complete the survey? (Choose three.)
Answer

Suggested Answer

The suggested answer is A, B, F.

When conducting an office site survey, it's essential to have certain components to ensure accuracy and efficiency. Using a battery pack to power APs is important for mobility and flexibility during the survey. A drawing of the office space is crucial as it allows for planning and documentation of AP and client placements. APs with built-in antennas are often preferred for their simplicity and ease of placement, which is practical for initial surveys. Using these components helps in creating an accurate site survey for optimal network performance.

Community Votes13 votes
ABFSuggested
100%
Question 2 of 244
An engineer is designing a wireless network that will support many different types of wireless clients. When conducting the survey, which client must be used to ensure a consistent experience for all of the wireless clients?
Answer

Suggested Answer

The suggested answer is D.

When designing a wireless network to support a wide range of clients, it is crucial to ensure that even the clients with the worst RF characteristics are able to connect and perform adequately. This approach ensures that all clients, regardless of their capabilities, can have a consistent and reliable network experience. Designing for the worst-performing client establishes a baseline that accommodates all other, more capable clients.

Community Votes12 votes
DSuggested
100%
Question 3 of 244
An engineer has performed a predictive site survey for high-speed data and voice in an indoor office. What is the recommended data rate with גˆ’67 dBm signal level for optimal VoWLAN design?
Answer

Suggested Answer

The suggested answer is C.

In designing a VoWLAN (Voice over WLAN) system, special considerations need to be taken to ensure optimal performance. The recommended data rate for voice or real-time application support typically starts at 12 Mbps, which balances reliable throughput with the need to minimize latency and jitter. The 24 Mbps data rate is generally more appropriate for real-time video applications rather than just voice. Therefore, for optimal VoWLAN design, 12 Mbps on 802.11 an provides a good balance as the lowest mandatory data rate while avoiding overcrowding and ensuring efficient use of the 5 GHz band which is less crowded than the 2.4 GHz band.

Community Votes23 votes
CSuggested
74%
D
26%
Question 4 of 244
A customer is concerned about mesh backhaul link security. Which level of encryption does the backhaul link use?
Answer

Suggested Answer

The suggested answer is B.

The backhaul link uses AES (Advanced Encryption Standard) for encryption. AES is a widely adopted symmetric encryption algorithm known for its security and efficiency, making it an appropriate choice for securing wireless mesh backhaul links.

Community Votes1 vote
BSuggested
100%
Question 5 of 244
As part of a wireless site survey in a hospital, an engineer needs to identify potential Layer 1 interferers. In which two areas is the engineer most likely to find sources of 2.4 GHz and 5 GHz RF noise? (Choose two.)
Answer

Suggested Answer

The suggested answer is B, E.

In a hospital setting, two likely sources of 2.4 GHz and 5 GHz RF noise are kitchens and patient rooms. Kitchens often contain microwave ovens, which operate around 2.4 GHz and can cause significant interference with wireless networks. In patient rooms, various personal electronic devices such as mobile phones, tablets, and laptops frequently use the 2.4 GHz and 5 GHz frequencies for Wi-Fi and Bluetooth communication, contributing to RF noise in those bands. Other medical equipment like MRI machines, Gamma Knife radiation treatment, and X-ray radiography operate at frequencies outside the 2.4 GHz and 5 GHz range, making them less likely to be sources of interference.

Community Votes3 votes
BESuggested
67%
AB
33%

About the Cisco 300-425 Certification Exam

About the Exam

The Cisco 300-425 (Designing Cisco Enterprise Wireless Networks (300-425 ENWLSD)) validates your knowledge and skills. Passing demonstrates proficiency and can boost your career prospects in the field.

How to Prepare

Work through all 244 practice questions across 49 pages. Focus on understanding the reasoning behind each answer rather than memorizing responses to be ready for any variation on the real exam.

Why Practice Exams?

Practice exams help you familiarize yourself with the question format, manage your time, and reduce anxiety on the test day. Our 300-425 questions are regularly updated to reflect the latest exam objectives.