HP HP2-Z34 Certification Practice Questions & Answers

Question 6 of 60

How does a non-hierarchical VPLS Martini solution prevent looping for broadcasts and multicasts?

A.

PEs use a hub and spoke topology, relying on the hub to distribute broadcasts and multicasts.

B.

PEs use split horizon operations, never forwarding a packet received on a pseudo wire (PW) over another PW.

C.

PEs implement Shortest Path Bridging (SPB) VLAN Mode (SPBV).

D.

PEs implement a version of Spanning Tree Protocol (STP). preferably Multiple STP (MSTP).

Question 7 of 60

A large data center needs to extend its Layer 2 connectivity and isolate tenants who might use the same VLAN IDs Which technology accomplishes this goal?

A.

SPBM

B.

Data Center Bridging (DCB)

C.

Multi-VPN-Instance CE (MCE)

D.

TRILL

Question 8 of 60

To provide redundancy, a company has multiple data centers that use server virtualization. What is a networking requirement for this scenario?

A.

less bandwidth at the server access layer and more bandwidth at the distribution layer than in a non-virtualized network

B.

physical network segmentation and isolation implemented at Layers 1 through 7

C.

localized storage volumes that are isolated within each data center

D.

extension of Layer 2 connectivity across the data centers

Question 9 of 60

Refer to the exhibit -

The exhibit displays a company with two data centers that connect by using EVl. The company needs a redundant solution for routing traffic between the subnets.

What is the best way to accomplish this goal?

A.

Run Virtual Router Redundancy Protocol (VRRP) on the data center subnets

B.

Place the EVl tunnel interface on each IRF virtual device in a different VPN instance, and then set up routing on each device by using the same IP addresses.

C.

Use TRILL on the EVl network.

D.

Combine IRF 1 and IRF 2 into the same IRF virtual device, and set up routing on that device

Question 10 of 60

In addition to the Admin MDC, an HP Comware switch supports two MDCs: MDC 2 and MDC 3. The administrator wants to allow tenants for both MDCs to log in to CLI for their own MDC without first accessing the Admin MDC How can the administrator accomplish this goal?

A.

Assign a console port to each MDC Tenants can then connect their own terminal equipment to their assigned port.

B.

Define a VLAN as the MDC Management VLAN in the Admin MDC. On each MDC. create this VLAN. Assign a port to it. Set up an IP address on it and set up Telnet or SSH access through it.

C.

Create subinterfaces for the AUX user-interface in the Admin MDC. Assign one of the subinterfaces to each of the MDCs. and set up Telnet or SSH access through that interface

D.

Define a physical port as the Management-Ethernet interface in the Admin MDC On each MDC. Configure a different IP address for this interface, and set up