Building HP FlexFabric Data Centers

Here you have the best HP HP2-Z34 practice exam questions

You have 60 total questions across 12 pages (5 per page)
These questions were last updated on February 7, 2026
This site is not affiliated with or endorsed by HP.

Question 1 of 60

Refer to the exhibit -
Exam HP2-Z34: Question 1 - Image 1

An MPLS VPLS solution (non-hierarchical) will connect the sites shown in the exhibit Which pseudo wire (PW) connections must the administrator configure?

A full mesh of PWs between every PE router that connects to a site and every P router between them

A hub-and-spoke set of PWs between one P router and all PE routers that connect to a site

A full mesh of PWs between every PE router that connects to a site

A hub-and-spoke set of PWs between one PE router and other PE routers that connect to a site

Suggested Answer: D

Community votes

No votes yet

Question 2 of 60

An administrator is configuring an HP switch to run SPBM. Which Spanning Tree Protocol (STP) configuration is required?

Disable STP.

Ensure that the switch with the lowest IS-IS router ID has the lowest bridge priority.

Set the spanning tree mode to ECT.

Map all B-VLANs to MSTP instance 4092

Suggested Answer: D

Community votes

No votes yet

Question 3 of 60

An administrator creates two VPN instances on an HP Comware switch, in addition to the public instance. The switch implements routing protocols and MPLS.
Which statement is correct about the routing tables and Label Forwarding Information Bases (LFIBs) maintained by the switch?

The switch uses a single routing table and maintains a separate LFIB for each VPN instance

The switch maintains a separate routing table and LFIB for each VPN instance, but the public tables automatically include entries from the other instances.

The switch maintains a separate routing table and LFIB for each VPN instance.

The switch maintains a separate routing table for each VPN instance and uses a single LFIB

Suggested Answer: D

Community votes

No votes yet

Question 4 of 60

An HP Comware switch uses the MDC feature and has two MDCs defined. Administrators want MDC 1 and MDC 2 to be able to exchange traffic. How should the administrators complete the configuration?

Create a virtual port with the same name on MDC 1 and MDC 2.

Create a virtual port on MDC 0 and tag that port for the MDC 1 and MDC 2 management VLANs

Connect a physical port that belongs to MDC 1 to a physical port that belongs to MDC 2

Configure MDC 0 to permit data exchange and add a backplane mapping between MDC 1 and MDC 2.

Suggested Answer: A

Community votes

No votes yet

Question 5 of 60

Refer to the exhibit -
Exam HP2-Z34: Question 5 - Image 1

An administrator is setting up an MPLS Layer 2 VPN between customer Sites 1 and 2 and is defining the pseudo wire (PW) ID for this purpose. How should the
PW IDs and router values be configured?

Set the PW ID to a different value on PE-1 and PE-2 The value on each router must match the label advertised by the peer for its loopback address.

Set the PW ID to a different value on PE-1 and PE-2 Also use a different value from other PWs on these routers.

Set the PW ID to the same value on PE-1 and PE-2. Use a different value from other PWs on these routers.

Set the PW ID to the same value on PE-1 and PE-2. The value on each router must match the S-VLAN ID for the associated service instance.

Suggested Answer: D

Community votes

No votes yet

About the HP HP2-Z34 Certification Exam

About the Exam

The HP HP2-Z34 (Building HP FlexFabric Data Centers) validates your knowledge and skills. Passing demonstrates proficiency and can boost your career prospects in the field.

How to Prepare

Work through all 60 practice questions across 12 pages. Focus on understanding the reasoning behind each answer rather than memorizing responses to be ready for any variation on the real exam.

Why Practice Exams?

Practice exams help you familiarize yourself with the question format, manage your time, and reduce anxiety on the test day. Our HP2-Z34 questions are regularly updated to reflect the latest exam objectives.