Here you have the best Dell DES-1721 practice exam questions
A customer is concerned they are over utilizing their 7K drives. Where can information about the real time I/O usage of individual drives be viewed?
To view real-time I/O usage of individual drives, navigate to Charting > Disks > [disk folder] > [disk number]. The charting section is typically used to access dynamic data like I/O statistics, whereas the hardware section provides more static information such as health status.
You have implemented two SC Series systems at a customer site. The Dell Storage Manager (DSM) Suite has been installed on a Microsoft Windows server. Both
Storage Centers have been installed and added to the DSM. However, several days after the installation, the customer is only able to see one Storage Center in the DSM GUI.
Which recommended action will correct this issue?
When a Storage Center is missing from the DSM GUI, the first step should be to check the network connections to the missing Storage Center. It's possible that network issues are preventing the DSM from communicating with the Storage Center. Reinstalling the DSM or restarting the Storage Center should only be considered after confirming that all network connections are intact and functional.
What is the maximum number of disks that can be supported by an SC4020 running SCOS 6.6.4 or later?
The SC4020 can support a total of 192 disks per Storage Center system. This number includes the disks in the storage system chassis and the disks in the SC200/SC220 expansion enclosures or SC280 expansion enclosures. The maximum limit of disks that an SC4020 can support is 192.
Which zones accurately describe the zoning requirement for replication connectivity to be established when the source array is in Legacy Port Mode and the target array is in Virtual Port Mode?
When the source array is in Legacy Port Mode and the target array is in Virtual Port Mode, the accurate zoning requirement should consider that the source array does not use virtual ports. Therefore, Zone 1 consisting of all Source WWNs (which include physical ports, since the source is in Legacy Port Mode) and all Remote Virtual Port WWNs (for the target, which uses virtual ports), along with Zone 2 consisting of all Source WWNs and all Remote Physical Port WWNs, makes sense. This configuration ensures all necessary connections are covered for both types of ports.
Which method can be used to identify the server HBA WWN?
The correct method to identify the server HBA WWN (World Wide Name) is using the QConverge Console GUI. This tool is specifically designed to manage and configure HBAs (Host Bus Adapters), providing detailed information about their configuration and attributes, including the WWN.