A network administrator prepares an ArubaOS switch to be monitored and managed by AirWave.
Which credentials are required for AirWave to change configuration settings on the switch?
A network administrator prepares an ArubaOS switch to be monitored and managed by AirWave.
Which credentials are required for AirWave to change configuration settings on the switch?
To manage and configure settings on an ArubaOS switch via AirWave, the network administrator needs to provide either the Telnet or SSH password. These credentials allow AirWave to establish a secure session with the switch, enabling the modification of its configuration.
Correct answer is C
Correct is C Select the first device in the Devices > List page. 4. Go to the Devices > Device Configuration page for that device and click the link to the device template as shown in Figure 27. Figure 27: Selecting the Device Template 5. In the Groups > Templates page, scroll down to the Credentials table. 6. In the Change credentials AMP uses to contact devices after successful config push field, select Yes. 7. (Optional) Enter a new Telnet/SSH user name and password to change the credentials AirWave uses to contact the devices. 8. Navigate to AMP Setup> General > Automatic Authorization. 9. In the Automatically Authorized Switch Mode field, select Manage Read/Write. 10.When switches with a factory-default configuration become active on the network, matches the group, and have the shared secret key, the DHCP server automatically authorizes switch provisioning. The devices then reboot and come online with their configuration in a good state.
https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=emr_na-a00059667en_us PAGE 34