Using HPE OneView

Here you have the best HP HPE2-T37 practice exam questions

You have 50 total questions to study from
Each page has 5 questions, making a total of 10 pages
You can navigate through the pages using the buttons at the bottom
This questions were last updated on November 18, 2024

Question 1 of 50

Your customer asks you if it possible to perform HPE Synergy initial setup remotely.

How should you respond?

Remote HPE Synergy setup is possible if HPE Composer 2 is used and a DHCP server is available in the management network

HPE Synergy can be configured remotely through a secure connection to the FLM if this option was enabled in the factory

HPE Synergy cannot be deployed remotely, as initial setup must be performed using a local console connection

Remote HPE Synergy installation can be done only if an additional set of the services was purchased together with hardware platform

Correct Answer: A

Remote HPE Synergy setup is possible if HPE Composer 2 is used and a DHCP server is available in the management network. The HPE Composer 2 provides the remote management features necessary to perform initial setup when integrated with a DHCP server, ensuring that the setup process can be carried out without requiring a local console connection.

Question 2 of 50

Your customer built a server profile for HPE Synergy Gen10 server and configured boot mode to Legacy BIOS.

Which feature is not available for this Compute Module?

Boot from SAN

Secure boot

Workload profile

BIOS management

Correct Answer: B

When a server is configured to use Legacy BIOS mode, the Secure Boot feature is not available. Secure Boot is a security standard that ensures that only software trusted by the manufacturer is allowed to run on the system, and it requires UEFI mode. Legacy BIOS mode does not support Secure Boot, thus making it unavailable for the Compute Module configured in this mode.

Question 3 of 50

HOTSPOT -

Click the option that will allow you to update the firmware of master and satellite modules.

Hot Area:

Correct Answer:

Reference:

https://techlibrary.hpe.com/docs/synergy/shared/firmware/s_compute-modules-nondisruptive-fwguide.html

Question 4 of 50

How can your customer implement HPE OneView so that it can be used to manage an HPE ProLiant server and HPE BladeSystem?

As a virtual appliance running on the supported hypervisor

As an application running on the server with CentOS Linux system

As an application running on the server with Windows system

As a physical appliance based on HPE ProLiant 360 Gen10

Correct Answer: A

HPE OneView can be implemented as a virtual appliance running on a supported hypervisor. This allows it to manage HPE ProLiant servers and HPE BladeSystem effectively. The virtual appliance model is supported and commonly used for deploying HPE OneView, providing flexibility and ease of management across diverse environments.

Question 5 of 50

Refer to the exhibit.

You discovered that one of the profiles is not compliant with the server profile template.

What could cause this profile to be inconsistent with the server profile template?

Network connectivity for HPE Synergy Compute Module was changed outside HPE OneView

Changes to the server profile were implemented directly on the server profile

The server was powered off or rebooted recently and iLO did not reconnect to HPE OneView

HPE OneView was restored from a backup that created inconsistency with the server profile template

Correct Answer: B

The server profile can become inconsistent with its template if changes are made directly to the individual server profile instead of through the server profile template. This direct modification leads to discrepancies between the template and the profile, generating the inconsistency alert.