A Solutions Architect is designing an environment with 1,200 services being offered through the NSX-T Data Center Load Balancer.
Which three selections are necessary to meet the minimum requirements to support the solution? (Choose three.)
A Solutions Architect is designing an environment with 1,200 services being offered through the NSX-T Data Center Load Balancer.
Which three selections are necessary to meet the minimum requirements to support the solution? (Choose three.)
To support an environment with 1,200 services through the NSX-T Data Center Load Balancer, you need an Extra Large Load Balancer to handle up to 2000 virtual services. This requires an Extra Large Edge Node because only it supports the capacity and features of the Extra Large Load Balancer. Additionally, a Tier 1 Gateway is necessary as load balancers are instantiated at the Tier 1 Gateway level in this architecture. Therefore, the essential components necessary to meet the requirements are an Extra Large Load Balancer, a Tier 1 Gateway, and an Extra Large Edge Node.
The correct Answer is ABE. Extra Large LB as it caters for up to 2000 Virtual services. Extra Large Edge VM as it is the only Edge form factor that supports the Extra Large LB. T1 Router, as the LB will be instantiated in the service-router component of the T1-Router.
Correct Answer si. A, B, E
Is it Correct?
Correct answer ABE. A Load Balancer must be connected to a Tier-1 gateway. Extra Large Load Balancer support up to 2000 Virtual Servers. Then to support that Load Balancer is required an Extra Large Edge that support up 1 Extra Large Load Balancer.
Correct Answer should be ABE. https://my-sddc.net/load-balancing-with-nsx-t-part-1/
ABE https://www.virten.net/2021/11/nsx-t-3-1-edge-node-sizing/ to support 1200 VIP we need an XL load balancer To support an XL LB we need a XL (or bare metal edge node) Pool Members Small LB Medium LB Large LB X-Large LB Small 0 1 0 0 0 Medium 2000 10 1 0 0 Large 7500 40 4 1 0 X-Large 10000 80 8 2 1 Bare-Metal 30000 750 75 18 9
ABE is right answer
Extra large load balancer doesn't exist in any documentation. so it can't be A Extra lager Edge Node doesn't exist in any document, so it can't be E Definitely, you need a large edge node for use all the LB capability and also a Large Load Balancer, then T1 for using this service. So in the end: BDE
Extra Large Load balancer can be viewed here https://docs.vmware.com/en/VMware-NSX-T-Data-Center/2.3/com.vmware.nsxt.admin.doc/GUID-19B12230-8BF4-4AF7-9EB7-3701B0A0A439.html which shows it can support up to 2000 services. Extra Large Edge node can be found here https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.1/installation/GUID-22F87CA8-01A9-4F2E-B7DB-9350CA60EA4E.html Answer is ABE
correct link for Extra Large Load Balancer https://configmax.esp.vmware.com/guest?vmwareproduct=NSX-T%20Data%20Center&release=NSX-T%20Data%20Center%203.0.0&categories=20-0
is there any document talking about this ?