Which step is required when adding an existing hard disk that is configured as a boot disk during virtual machine creation?
Which step is required when adding an existing hard disk that is configured as a boot disk during virtual machine creation?
When adding an existing hard disk that is configured as a boot disk during virtual machine creation, it is required to remove the existing disk before adding the boot disk. This step ensures that there are no conflicts and that the boot disk is properly recognized during the boot process.
C 484/500 27-APR-2023
Add an existing hard disk that is configured as a boot disk during virtual machine creation. To ensure that the virtual machine can boot, remove the existing disk before you add the boot disk. After you add a new hard disk to the virtual machine, you might need to go into the BIOS setup to ensure that the disk you were using to boot the virtual machine is still selected as the boot disk. You can avoid this problem by not mixing adapter types, and by using device node 0 on the first adapter as the boot disk. https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.vm_admin.doc/GUID-79116E5D-22B3-4E84-86DF-49A8D16E7AF2.html
B is correct