A customer has a network where BGP has been enabled and the BGP neighbor is configured on the Tier-0 Gateway. An NSX administrator used the get gateways command to retrieve this information:
Which two commands must be executed to check BGP neighbor status? (Choose two.)
To check the BGP neighbor status, you need to focus on the Tier-0 gateway where BGP is configured. The command 'vrf 3' connects you to the VRF context for the Tier-0 Service Router (SR), which is necessary for accessing the BGP settings. The command 'sa-nsxedge-01(tier0_sr)> get bgp neighbor' retrieves the BGP neighbor status specific to the Tier-0 Service Router. These commands together will provide the required BGP neighbor information.
A and F BGP will be configured on the T0 SR. Connect to the VRF for the T0 SR and run get bgp neighbor once connected to it. https://docs.vmware.com/en/VMware-Validated-Design/5.1/sddc-deployment-of-vmware-nsx-t-workload-domains-with-multiple-availability-zones/GUID-8BD4228A-75C6-4C60-80B4-538D4297E11A.html
AF correct!
A. vrf 3 F. sa-nsxedge-01(tier0_sr)> get bgp neighbor
Confirm thru lab with NSX lab guide : Review the Routing Tables in Each VRF. You need to enter into the VRF context for service router in tier 0