When deploying an NSX Edge Transport Node, what two valid IP address assignment options should be specified for the TEP IP addresses? (Choose two.)
When deploying an NSX Edge Transport Node, what two valid IP address assignment options should be specified for the TEP IP addresses? (Choose two.)
The two valid IP address assignment options for the TEP IP addresses when deploying an NSX Edge Transport Node are to use a Static IP List and to use an IP Pool. Using a Static IP List allows the specification of exact IP addresses to be assigned, whereas using an IP Pool enables dynamic assignment of IP addresses from a pre-defined pool. These methods ensure that the NSX Edge Transport Node can appropriately configure its tunnel endpoints for network traffic management.
IP address is assigned to the NSX Edge switch that is configured. It is used as the tunnel endpoint of the NSX Edge. Select Use IP Pool or Use Static IP List for the overlay N-VDS. If you select Use Static IP List, specify: Static IP List: Enter a list of comma-separated IP addresses to be used by the NSX Edge. Gateway: Enter the default gateway of the TEP, which is used to route packets another TEP in another network. For eample, ESXi TEP is in 20.20.20.0/24 and NSX Edge TEPs are in 10.10.10.0/24 then we use the default gateway to route packets between these networks. Subnet mask: Enter the subnet mask of the TEP network used on the NSX Edge. If you selected Use IP Pool for IP assignment, specify the IP pool name.
Reference: https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.2/installation/GUID-53295329-F02F-44D7-A6E0-2E3A9FAE6CF9.html
You need to create IP Pool or use DHCP server
correct answer is A & C