SIMULATION -
There is a server having 172.24.254.254 and 172.25.254.254. Your System lies on 172.24.0.0/16. Make successfully ping to 172.25.254.254 by Assigning following IP: 172.24.0.x where x is your station number.
SIMULATION -
There is a server having 172.24.254.254 and 172.25.254.254. Your System lies on 172.24.0.0/16. Make successfully ping to 172.25.254.254 by Assigning following IP: 172.24.0.x where x is your station number.
To successfully ping 172.25.254.254 from your system located in the 172.24.0.0/16 network, follow these steps: 1. Assign your system an IP address from the 172.24.0.0/16 subnet by using a command or a system network configuration tool. Ensure the IP address is in the format 172.24.0.x, where 'x' is your station number (e.g., if your station number is 1, use 172.24.0.1). 2. Set the correct subnet mask, typically 255.255.0.0 for a /16 network. 3. Configure the default gateway, which should be a router IP that facilitates communication between the subnets, often on the same network as your system (e.g., 172.24.0.1 or 172.24.254.254). 4. Ensure IP forwarding is enabled on the router. 5. Save the settings and restart the network interface (for example, using commands like 'ifdown eth0' and 'ifup eth0' or through a network configuration tool). 6. Verify the configuration using a command like 'ifconfig' to check the assigned IP address and network settings. Once configured, you should be able to ping 172.25.254.254 successfully, assuming the correct routing is in place on the server/router.
ip address add 172.24.0.0/16 ping 172.25.254.254