SIMULATION -
There are two different networks 192.168.0.0/24 and 192.168.1.0/24. Where 192.168.0.254 and
192.168.1.254 IP Address are assigned on Server. Verify your network settings by pinging 192.168.1.0/24 Network's Host.
SIMULATION -
There are two different networks 192.168.0.0/24 and 192.168.1.0/24. Where 192.168.0.254 and
192.168.1.254 IP Address are assigned on Server. Verify your network settings by pinging 192.168.1.0/24 Network's Host.
In order to verify the network settings and ensure connectivity between the two networks 192.168.0.0/24 and 192.168.1.0/24, follow this procedure: 1) Check the IP address configuration of the server using the command `ip a`. Ensure that one network interface is configured with an IP address from the 192.168.0.0/24 range (e.g., 192.168.0.254) and another interface with an IP address from the 192.168.1.0/24 range (e.g., 192.168.1.254). 2) Make sure that there are no firewall rules blocking the ICMP packets between the two networks. 3) If IP forwarding or routing is required between the two networks, make sure the server is configured to act as a router. You can enable IP forwarding by adding `net.ipv4.ip_forward = 1` to the /etc/sysctl.conf file and then applying the changes using `sysctl -p`. 4) Finally, test the connectivity by pinging a host in the 192.168.1.0/24 network from a host in the 192.168.0.0/24 network with the command `ping 192.168.1.x`, where `x` is the host number you want to reach.
ip -br a ping 192.168.1.0