Ethernet 2/1 has an IP Address of 10.0 1 2 in Zone ‘trust’ (LAN).
If both interfaces are connected to the same virtual router, which IP address information will an administrator need to enter in the Destination field to access the internet?
Ethernet 2/1 has an IP Address of 10.0 1 2 in Zone ‘trust’ (LAN).
If both interfaces are connected to the same virtual router, which IP address information will an administrator need to enter in the Destination field to access the internet?
To access the Internet, the administrator will need to enter a default route in the destination field. The default route, which is represented as 0.0.0.0/0, is used to route traffic to any destination not listed in the routing table. This tells the router to forward packets to the next hop for any IP address not explicitly covered by a more specific route. Therefore, entering 0.0.0.0/0 in the destination field is the correct configuration to allow access to the internet.
D checked on our firewall
D. The default static IP address.
D: In destination field you must define IP/Netmask. Otherwise you cannot save (OK) the configuration.
0.0.0.0/0
D Correct!