An administrator has configured a pair of firewalls using high availability in Active/Passive mode.
Link and Path Monitoring is enabled with the Failure Condition set to `any`.
There is one link group configured containing member interfaces ethernet1/1 and ethernet1/2 with a Group Failure Condition set to `all`.
Which HA state will the Active firewall go into if ethernet1/1 link goes down due to a failure?
Since the administrator configured the Failure Condition to `any`, and the Group Failure Condition is set to `all`, the firewall will only failover to the passive state if all member interfaces in the link group are down. In this scenario, only ethernet1/1 has gone down while ethernet1/2 is still up, so the active firewall will stay in the Active state.
question is poorly written. it mentions "which HA state will the active firewall go into". The state will remain the same. it wont change
A. Active is correct
A Path group condition is all, only 1 is down, so no changes shall be trigered.
A is correct
A https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClG7CAK