A firewall should be advertising the static route 10.2.0.0/24 into OSPF. The configuration on the neighbour is correct, but the route is not in the neighbour's routing table.
Which two configurations should you check on the firewall? (Choose two.)
A firewall should be advertising the static route 10.2.0.0/24 into OSPF. The configuration on the neighbour is correct, but the route is not in the neighbour's routing table.
Which two configurations should you check on the firewall? (Choose two.)
To advertise a static route into OSPF, it is essential to ensure that the configuration responsible for this redistribution is correctly set up. First, in the OSPF configuration, the correct redistribution profile should be selected in the OSPF Export Rules section to allow the static route's inclusion into the OSPF routes (Option B). Additionally, within the redistribution profile, the Redist option must be selected to permit the redistribution of the static routes (Option C). These configurations ensure that the static route is properly advertised into OSPF and can appear in the neighbor's routing table.
B and C. Question is asking to pick 2.
I took my exam today. There was almost no question from here. You need to have experience on PAN-OS 10.2
Do you know where I could find a dump with question from exam? Thanks in advance
BC. tested this.
https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClGTCA0
B & C are correct. https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClGTCA0
B and C correct
Answers are B, C. Please ensure that choice C shows as selected.
B and C please : )
Correct options: B, C.
B & C are correct.
B and C
And C as well.
B & C are correct.
B should be an answer I think. https://docs.paloaltonetworks.com/pan-os/9-0/pan-os-web-interface-help/network/network-virtual-routers/ospf/ospf-export-rules-tab
And C - two answers here.