You want to disconnect a DS224C shelf with 3.8 TB NetApp Storage Encryption (NSE) SSDs to an AFF A300 HA pair with two DS224C shelves with 3.8 TB SSDs without NSE in one stack.
In this scenario, how would you add the shelf?
You want to disconnect a DS224C shelf with 3.8 TB NetApp Storage Encryption (NSE) SSDs to an AFF A300 HA pair with two DS224C shelves with 3.8 TB SSDs without NSE in one stack.
In this scenario, how would you add the shelf?
To add a DS224C shelf with 3.8 TB NetApp Storage Encryption (NSE) SSDs to an AFF A300 HA pair, you must connect the shelf to an HA pair with NSE drives. This is because NSE drives cannot be mixed with non-NSE drives in the same node or HA pair.
Should be C , Should be C NSE drives cannot mix with non-NSE drives in HA pair. https://community.netapp.com/t5/ONTAP-Hardware/NSE/td-p/6860
https://kb.netapp.com/onprem/ontap/os/Does_NetApp_support_encrypted_and_non-encrypted_disks_on_the_same_node NetApp Storage Encryption (NSE) uses Self-Encrypting Disks (SED) that are FIPS certified. Drives of this type CAN NOT be mixed with drives that are not FIPS certified SEDs in the same node or HA pair.
NSE and non-NSE drives can't be mixed in the same HA pair
HangLiu is rigth