Click the Exhibit button.
A customer wants to replace their ONTAP cluster CN1610 switches with Cisco Nexus 3132Q-V switches. They want to perform a non-disruptive upgrade.
Referring to the exhibit, which cable will be required to non-disruptively migrate to the new switches?
Given that the NetApp CN1610 operates at 10GbE with SFP+ ports and the Cisco Nexus 3132Q-V operates at 40GbE with QSFP+ ports, the appropriate cable to enable a non-disruptive upgrade would be a 40GbE QSFP+ to 4x10GbE SFP+ cable. This is because the Nexus switch can use a breakout cable to split a 40GbE port into four 10GbE ports, which is necessary for compatibility with the 10GbE SFP+ ports of the CN1610. Therefore, the correct answer is a 40GbE QSFP+ to 4x10GbE SFP+ cable.
Should be D , from below links shared Nexus required breakout cable from 40GbE QSFP+ to 4x10GbE SFP+ on CN1610 https://library.netapp.com/ecm/ecm_download_file/ECMLP2518303
As HangLiu wrote - only D make sense!
Cisco Nexus 3132-QV is 40Gb with QSFP+ ports. The NetApp CN1610 is 10Gb with SFP+ ports. This means that the NetApp storage connecting CN1610 shall be using 10Gb SFP+. So, to replace the CN1610, answer D is correct and the only choice in this question.
https://docs.netapp.com/us-en/ontap-systems-switches/switch-cisco-3132q-v/switch-requirements.html
D - you need to senf Cluster Lifs from 1 switch to another usign 4 x 10GB breakout from CN1610 to 3132-QV 40/100GbE switch
As HangLiu wrote - only D make sense
On Nexus 3132Q-V switches, you can operate QSFP/QSFP28 ports as either 40/100 Gb Ethernet or 4x 10 Gb Ethernet modes.