Click the Exhibit button.
You are configuring a NetApp cluster to communicate on VLAN 1. However, the new LIF is unable to communicate with any host in the VLAN. The network administrator has configured the switch port as an access (untagged) port on VLAN 1 and says that the VLAN is non-routed.
Referring to the exhibit, what would you do to troubleshoot this problem? (Choose the best answer.)
The switch port is configured as an access port on VLAN 1, which means that the network traffic would be untagged. In the output, the LIF (Logical Interface) is not able to communicate with any host in the VLAN, indicating it may not be properly associated with the correct port. Reconfiguring the LIF to be on port e0c, which matches the VLAN configuration on the node, ensures the LIF is correctly tied to the access port, resolving the communication issue.
B is the correct answer, have to reconfigure the interface to switch side is not tagging the vlan
The port is configured as an access port so there is no need to also create a VLAN interface... Answer is B
The addresses which are being pinged are on the same subnet, no gateway is needed. I also think B is correct.
B is correct I think
I think the right answer is A, but not sure.