A customer ordered a FAS8200 running ONTAP 9.4 with 4 TB SATA drives. You want to use the ADP features to avoid consuming the high capacity drives for the root aggregates. Before starting the initial setup of the cluster, you run the aggr status command and notice that ADP is not being used.
In this scenario, which boot menu option do you use to solve the problem?
To enable Advanced Drive Partitioning (ADP) on a FAS8200 running ONTAP 9.4, the appropriate boot menu option to use is Option 9. This option specifically allows for the configuration of ADP, which is needed to avoid consuming high-capacity drives for the root aggregates.
C? (1) Normal Boot. (2) Boot without /etc/rc. (3) Change password. (4) Clean configuration and initialize all disks. (5) Maintenance mode boot. (6) Update flash from backup config. (7) Install new software first. (8) Reboot node. (9) Configure Advanced Drive Partitioning
I guess so
Agreed, the answer is C option 9
ans is C
Here is the link to the official doumentation :https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-vsmg%2FGUID-46CCF74B-BCE5-4881-B43C-B2C0A51FE14F.html The Answer is C.