HOTSPOT
-
You create a Windows Autopilot deployment profile.
You need to configure the profile settings to meet the following requirements:
• Automatically enroll new devices and provision system apps without requiring end-user authentication
• Include the hardware serial number in the computer name.
Which two settings should you configure? To answer, select the appropriate settings in the answer area.
NOTE: Each correct selection is worth one point.
To configure a Windows Autopilot deployment profile to meet the specified requirements, you need to set the following: 1. **Automatically enroll new devices and provision system apps without requiring end-user authentication:** - **Deployment mode:** Select "Self-Deploying mode" as it allows devices to be deployed with zero-touch, without requiring user authentication. 2. **Include the hardware serial number in the computer name:** - **Apply computer name template:** Use the template "%SERIAL%" which will include the hardware serial number in the computer name. Therefore, the settings you need to configure are: 1. **Deployment mode:** Self-Deploying 2. **Apply computer name template:** %SERIAL% Make sure to configure these settings in the Windows Autopilot deployment profile to meet the requirements.
Given answer is correct. For deployment mode you can use self-deploying mode.
Agree answer is correct
Answer not correct. Question states provision system apps without user authentication. That requires the option pre-provisioned deployment. Device name template is correct. You can user %SERIAL% variable.
I agree but then it would have needed 3 options to change
great!!!
I would vouch for Pre-Provisioning. Self-deploying as told in other comments, is for shared devices without a user. • Automatically enroll new devices and provision system apps without requiring end-user authentication > You can enable pre-provisioning for this one. • Include the hardware serial number in the computer name. > Apply device name template.
https://learn.microsoft.com/en-us/autopilot/self-deploying
From your link: 1. Create an Autopilot profile for self-deploying mode with the desired settings.
Answer is correct On the Out-of-box experience (OOBE) page, for Deployment mode, choose one of these two options: User-driven: Devices with this profile are associated with the user enrolling the device. User credentials are required to enroll the device. Self-deploying (preview): Devices with this profile aren't associated with the user enrolling the device. User credentials aren't required to enroll the device. When a device has no user associated with it, user-based compliance policies don't apply to it. When self-deploying mode is used, only compliance policies targeting the device are applied. https://learn.microsoft.com/en-us/autopilot/profiles#:~:text=User%2Ddriven%3A%20Devices,device%20are%20applied.
Answer is correct. Steps to configure these settings in the Autopilot deployment profile: Create or edit an existing Windows Autopilot deployment profile in the Microsoft Endpoint Manager admin center. Set the deployment mode: Go to Windows Autopilot deployment profiles. Select or create a profile and then go to Out-of-box experience (OOBE). Choose Self-Deploying (preview) or Autopilot for pre-provisioned deployment under Deployment mode. Configure the computer name template: While still editing the profile, find the Apply device name template setting. Enter the desired template, for example, PC-%SERIAL%
No i think the answer is wrong: 1- Allow pre-provisioned deployment: Enable pressing Windows key 5 times to run OOBE without user authentication to enroll device and provision all system-context apps and settings. User-context apps and settings will be delivered when the user signs in. Because Self deploying mode lets you deploy a Windows device as a kiosk, digital signage device, or a shared device. We see nothing in the question about: Kiosk mode etc. 2- Apply device name template
Surreeee!!