Examice

Exam JN0-363 All QuestionsBrowse all questions from this exam

Go to Exam

Question 18

Click the Exhibit button.

You configured an aggregated Ethernet bundle between R1 and R2. Unfortunately, the bundle is not working correctly.

Referring to the exhibit, which configuration change will solve this issue?

The LACP minimum links configuration should be changed to 2 on R1.

The LACP periodic mode should be changed to fast on R2.

The LACP mode should be changed to active on R1.

The LACP minimum links configuration should be changed to 1 on R2.

Correct Answer: C

To form a proper LACP (Link Aggregation Control Protocol) bundle, at least one side needs to be in active mode to initiate the negotiation process. Currently, both R1 and R2 are in passive mode, meaning neither will initiate the connection, causing the bundle not to work correctly. Changing the LACP mode to active on R1 will solve this issue by enabling R1 to start the negotiation.

Discussion

GolanZemachOption: C

Answer C is correct at least one speaker needs to be in active mode

wassupkayOption: C

C - passive means both are waiting for a connect to establish LACP session. thus, neither are sending the connect, so none will establish LAC.

RbrahmiOption: C

The correct answer is C

GolanZemachOption: C

Answer C is correct at least one speaker needs to be in active mode

antigel8Option: A

In R1, ge-0/0/1 and 2 are attached to ae0 which is configured with a minimum-link of 1. R2 ae configure has a minimum of 2 which is correct. R1 needs to increase the minimum of links to 2.

antigel8

I am wrong in my previous statement. Answer is to turn at least one speaker to active mode