You added a new ESXi host connected to port ge-0/0/1. One of the VMs configured with VLAN 10 is not reachable from any other device on the switch. To troubleshoot, you decide to verify if the VM's MAC address is learned properly under VLAN 10.
Which command would you use in this scenario?
To verify if the VM's MAC address is learned properly under VLAN 10, the appropriate command is 'show ethernet-switching table vlan-id 10'. This command displays the MAC addresses learned on the switch for a specific VLAN, which in this case is VLAN 10, and provides information on the corresponding interfaces. This helps in determining whether the VM's MAC address is being correctly learned on the VLAN.
A. show ethernet-switching table vlan-id 10 This command displays the MAC addresses learned on the switch for a specific VLAN, in this case, VLAN 10. It will provide information about which MAC addresses are associated with the VLAN and the corresponding interfaces. This can help you verify if the VM's MAC address is being learned properly on the specified VLAN.