Which three statements are correct about EVPN route types? (Choose three.)
Which three statements are correct about EVPN route types? (Choose three.)
EVPN (Ethernet VPN) utilizes various types of routes to convey specific information for network operations. Type 3 routes carry replication information, particularly used for multicast routing and replication in EVPN networks. Type 2 routes are crucial as they carry endpoint MAC address information as well as endpoint IP address information, facilitating accurate endpoint identification and reachability within the network. Understanding these route types is vital for configuring and optimizing EVPN.
Cisco explains it better: The EVPN control plane advertises the following types of information: Route type 1 – This is an Ethernet Auto-Discovery (EAD) route type used to advertise Ethernet segment identifier, Ethernet Tag ID, and EVPN instance information. EAD route advertisements may be sent for each EVPN instance or for each Ethernet segment. Route type 2 – This advertises endpoint reachability information, including MAC and IP addresses of the endpoints or VTEPs. Route type 3 – This performs multicast router advertisement, announcing the capability and intention to use ingress replication for specific VNIs. Route type 4 – This is an Ethernet Segment route used to advertise the Ethernet segment identifier, IP address length, and the originating router's IP address. Route type 5 – This is an IP prefix route used to advertise internal IP subnet and externally learned routes to a VXLAN network.
Type 1 route, Ethernet autodiscovery route Type 2 route, MAC with IP advertisement route Type 3 route, inclusive multicast Ethernet tag route The tunnel types supported in an EVPN route type 3 when BGP-EVPN MPLS is enabled are ingress replication, P2MP MLDP, and composite tunnels Type4 route, Ethernet segment Route Type 5 route, IP prefix Route
should be ABC
abc is correct