Click the Exhibit button.
Referring to the exhibit. Internal BGP between R1 and R2 is not establishing.
What is the problem in this scenario?
Exam JN0-363 All QuestionsBrowse all questions from this exam
Question 56
Correct Answer: C
Internal BGP (iBGP) requires the neighbors to be in the same autonomous system (AS). In this scenario, R1 and R2 are using the same AS number (64512), so option B is incorrect. The 'Active' state in BGP indicates that the router is seeking a connection with the neighbor, but no connection has been established. This typically happens if the router does not have a route to the neighbor's IP address. The configuration does not mention any route to 192.168.200.2, which suggests that R1 does not have a route to this IP. Therefore, the problem in this scenario is that R1 does not have a route to 192.168.200.2.
Discussion
Misho_e_pich_2023Option: C
It makes no sense to have internal BGP and demand for different ASNs.. It's C!
dennis1988Option: C
The question asks for internal BGP, so ASN should be the same. A and D are also wrong, so it should be C
BW1259Option: C
It can't be B as the question states it's an iBGP peering
ZaraouiOption: B
active stats means it tried to establish the tcp session so the NH was found before.
GolanZemachOption: B
answer B In BGP Idle State, the router searches the routing table for a valid route for the neighbor's IP address. If it does not have a route for its neighbor's IP address, it remains in the Idle State. No or negligible BGP resources are allocated in this state.