On Huawei switch, which of the following commands can be used to set port duplex mode as "auto negotiation"? (Choose two)
On Huawei switch, which of the following commands can be used to set port duplex mode as "auto negotiation"? (Choose two)
To set port duplex mode to auto negotiation on Huawei switches, the correct commands are 'duplex negotiation auto' and 'duplex auto'. These commands directly specify that the port should operate in auto negotiation mode, allowing the port to automatically negotiate the best duplex setting with connected devices. Other options do not explicitly set the port to auto negotiation mode.
All answers are incorrect, the correct command is: [Switch-GigabitEthernet1/0/1] undo negotiation auto Or: [Switch-port-group-portgroup1] undo negotiation auto //Configure interfaces to work in non-auto-negotiation mode in a batch. undo duplex, only take effect when auto negotiation is off on interface: [Huawei-GigabitEthernet0/0/1]undo duplex Error: Please undo negotiation auto first.
Could be a configuration on Quidway S8500, not the newer modells. Put I do not have any reference device.
those commands are for NO auto negotiation. I tried on eESP with S5700: [Huawei-GigabitEthernet0/0/1]auto duplex full [Huawei-GigabitEthernet0/0/1]negotiation auto they are all wrong. .
Do you think this question will be in the DATACOM HCIA ? Because HCIA DATA don't talk about duplex mode ?