Examice

Exam HPE6-A69 All QuestionsBrowse all questions from this exam

Question 32

Your customer is in midst of implementing a 2 node VSF stack. They require high speed and redundancy between the VSF members, the stack must still be operational if any one member of the stack fails. They provided you with the attached diagram showing their intended setup, it shows how the 2 DAC cables are physically connected.

Although the stack is working, there seems to be a problem with VSF Link 1. Additionally, they wonder what would happen to the stack if the Master role switch was down. The customer is concerned about the state of the stack redundancy and requires your input.

What would you provide your customer? (Choose two.)

They need to reconfigure interface 1/1/28,2/1/28 to be part of link 1.

They need to designate member 2 as a secondary member.

They need to “shut”, “no shut” interface 2/1/27.

Although interface 2/1/27 is administrative up, member 2 link 2 is shutdown, it needs to be enabled.

They need to add 1/1/27,1/1/28 to lag 256, then add “interface lag256” to link 1.

Member 2 is already a secondary member, no change is required.

Correct Answer: C, D

Interface 2/1/27 on member 2 is currently down, so shutting and then no shutting this interface can potentially bring it up and resolve the issue with VSF Link 1. Additionally, even though interface 2/1/27 is administratively up, if member 2's link 2 is shut down, it needs to be enabled to ensure redundancy and operation of the stack in case one member fails.

Discussion

andmekOptions: AB

My answers are A & B. With two member stack only supports chain topology.