HPE6-A47 Exam - Question 16

Question

Refer to the exhibit.

The customer needs to expand its wired and wireless network to a new building, Building 2, which is near the existing building, Building 1. The exhibit shows the logical plan that the architect has created so far. The aggregation layer switches in the new building should provide the default gateway services for the VLANs in the new building and route traffic to the core. The existing Aruba Mobility Controllers (MCs) will control the new APs.

What should be the VLAN assignment for Link 1, indicated in the exhibit?

Examice · Accepted Answer

The appropriate VLAN assignment for Link 1 should be an unused VLAN, such as 200. Link 1 serves as a routed link between the core layer and aggregation layer switches. In such scenarios, it is standard practice to use a separate VLAN for the link to ensure proper network segmentation and routing efficiency. VLANs 21, 22, and 23 are specific to Building 2 subnets, and VLANs 11, 12, and 13 are related to Building 1 subnets; thus, using a dedicated VLAN for the routed link is the correct approach.

Hugh_Jazz · Answer

Answer should be A.  This is a routed link, meaning you should only have one VLAN assigned to the link.  Obvious since VLANs are terminated at a layer 3 boundary, but also right out of the curriculum.

poris27 · Answer

In my opinion answer A is wrong because on building-1 their gateway in Core , they don't have aggregation. Answer A is correct if they have aggregation switch. I think the answer should be B.

mpj_quick · Answer

I think is A because aggregation layer has DG role in building 2 and route traffic to the core.

moundirr · Answer

A is correct

HPE6-A47 Exam - Question 16

Discussion