HPE6-A72 Exam - Question 54

Question

Refer to the exhibit. The above command was applied to an Aruba AOS-CX 6300M 24-port switch with 4-port SFP56 uplinks. All ports are set as access switchports. Which ports carry VLAN 1 traffic?

Examice · Accepted Answer

Based on the exhibit, VLAN 1 (DEFAULT_VLAN_1) does not have specific interfaces explicitly listed, unlike VLANs 10 and 20. Therefore, VLAN 1 traffic is likely carried by all ports that are not assigned to VLANs 10 or 20. From the exhibit, we can see that VLAN 10 includes ports 1/1/1 to 1/1/7 and VLAN 20 includes ports 1/1/11 to 1/1/14. This means the remaining ports (1/1/8, 1/1/9, 1/1/10, 1/1/15 to 1/1/24) would default to VLAN 1. Thus, the ports carrying VLAN 1 traffic are 1/1/8, 1/1/10, 1/1/5-1/1/24, although there seems to be a contradiction with port 1/1/5 in the options but given the logical arrangement, it aligns with option A.

YazanOmar · Answer

Must be 1/1/8 to 1/1/10 and 1/1/15 to 1/1/28

toni2 · Answer

It's D. the answwer has na error 1/1/5, nut it must be 1/1/15

davidv · Answer

must be 1/1/15-1/1/28?

RAADC · Answer

I agree with toni2

XalaGyan · Answer

basically all unassigned ports and the platform has 28 ports in total. i agree that it has to be a typo and must be a 15 instead of a 5

Roman1969 · Answer

Is the D, but the range interfact correct is 1/1/15 to 28

LAFNELL · Answer

There is a mistake on answers.
it should not be 1/1/5 but 1/1/15-1/1/28

HPE6-A72 Exam - Question 54

Discussion