A customer needs a single, dual-processor server for an Enterprise Resource Planning solution for a single office. The customer application uses a mix of HDDs and SSDs and up to 3TB of RAM.
Which HPE Solution should you propose?
A customer needs a single, dual-processor server for an Enterprise Resource Planning solution for a single office. The customer application uses a mix of HDDs and SSDs and up to 3TB of RAM.
Which HPE Solution should you propose?
The HPE ML350 Gen10 is the best choice for a single, dual-processor server supporting an Enterprise Resource Planning solution with a mix of HDDs and SSDs and up to 3TB of RAM. The ML350 Gen10 can support a maximum of 3TB of RAM, making it suitable for the specified requirement. Other options either do not support the required maximum RAM or are not single-server solutions.
ML350 is the correct choice. Apollo 2000 Server is not suitable because it isn't a single-server solution, and it supports up to 2TB RAM only.
ML350 only supports 1.5TB of RAM, so cannot be that.
Check it again it supports 3TB
should be C
The apollo 2x00 does not sound right: https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=a00019876enw
HPE ProLiant ML350 Gen10 server Maximum Memory3.0 TB with 128 GB DDR4 DIMM
ML350 Gen10 support Maximum capacity (LRDIMM) = 3TB and Maximum capacity (RDIMM) =1.5TB. Single. storage support max 24 HDD/SSD 2.5". I agree with the answer is C.
because if it is the correct one. don't they change it?
Answer C, for sure
The good answer is answer C The question start with " a single server" and the ML350 support 3TB RAM. It's the best answer
Apollo 2TB maximum
think is C
https://support.hpe.com/hpesc/public/docDisplay?docId=a00036757en_us&docLocale=en_US should be C
ML350 Gen10
That's what is in the documentation.
ML350, for sure
Not the apollo ,for sure
https://support.hpe.com/hpesc/public/docDisplay?docId=a00036757en_us&docLocale=en_US should be C
ML350 is a single server and fits the specs.