Refer to the exhibit.
A customer has deployed a FortiGate 300E with virtual domains (VDOMs) enabled in the multi-VDOM mode. There are three VDOMs: Root is for management and internet access, while VDOM 1 and VDOM 2 are used for segregating internal traffic. AccountVInk and SalesVInk are standard VDOM links in Ethernet mode.
Given the exhibit, which two statements below about VDOM behavior are correct? (Choose two.)
VDOM links can have different types, such as Ethernet or PPP, determining how they handle IP addressing and communication. Option C states that VDOM links are in Ethernet mode because they have IP addresses assigned on both sides and is correct based on the exhibit showing IP addresses assigned to both sides of the VDOM links. Option D is also correct as it explains that the Root VDOM is a management domain (often referred to as an Admin type in the context of FortiGate) and the other VDOMs (VDOM 1 and VDOM 2) are segregated for internal traffic handling or traffic domains.
I guess its A and B: B is quite obviuous: https://docs.fortinet.com/document/fortigate/7.0.0/administration-guide/335646/inter-vdom-routing: "VDOM link does not support traffic offload. If you want to use traffic offload, use NPU-VDOM-LINK." Type Ethernet is only needed for IPv6: https://docs.fortinet.com/document/fortigate/6.4.2/administration-guide/335646/inter-vdom-routing "For example, when running OSPF in IPv6, a link-local address is required in order to communicate with OSPF neighbors. For a VDOM link to obtain a link-local address its type must be set to ethernet" C is wrong because you can set IPs on PPP. You do not need to. D is wrong because Root VDOM is routing, so no Admin VDOM E is wrong because I need a IP in AccountLink though this is in Ethernet Mode So imho its A and B
IP is missing in this picture only, the dump i have is having IP on it 11.11.11.2/30 And this dump is missing around 50 questions, i got failed with this dump. The one i have now is having more than 100 questions
Where did you get that dump?
Should be two answers, B and E https://docs.fortinet.com/document/fortigate/7.0.0/administration-guide/335646/inter-vdom-routing https://docs.fortinet.com/document/fortigate/7.4.0/administration-guide/335646/inter-vdom-routing-configuration-example-internet-access
A and B seem right. A - It does not matter and OSPF can be configured without any changes. B - Offload is available NPU-VDOM link only.
Guy if you read the question you will see that it says standard vdom link i think they would have mentioned something about accelerated so B is not correct AccountVInk and SalesVInk are standard VDOM links in Ethernet mode.
going for A and D
So for me A and B is correct. an A because OSPF ipv4 can be run with PPP and Ethernet. Not E because of the missing IP within VDOM 1 on the Vlink