A tunnel mode wireless network is configured on a FortiGate wireless controller.
Which task must be completed before the wireless network can be used?
A tunnel mode wireless network is configured on a FortiGate wireless controller.
Which task must be completed before the wireless network can be used?
Before a tunnel mode wireless network can be used on a FortiGate wireless controller, it must be manually assigned to a FortiAP profile. This is necessary to ensure that the wireless network configurations are correctly applied to the associated FortiAP devices. Configuration of firewall policies and other settings can follow, but assigning the network to a FortiAP profile is the initial prerequisite step to enable the network.
A is more accurate as you need to configure DHCP on wireless interface for clients to get IPs, without policies clients can still connect to network but no Internet access.
not shure but minimum A
C is correct, firewall policy is a must before SSID can be used to connect users
We can eliminate A if we assume the SSID was created properly. B is obviously wrong C is required if internet access is required D is required if the FortiAPs are not set to broadcast ALL Tunnel mode SSIDs. So my conclusion is this is a badly worded question.
SG P131 C is correct
C correct