Refer to the exhibit.
You are operation an internal network with multiple OSPF routers on the same LAN segment. FGT_3 needs to be added to the OSPF network and has the configuration shown in the exhibit. FGT_3 is not establishing any OSPF connection.
What needs to be changed to the configuration to make sure FGT_3 will establish OSPF neighbors without affecting the DR/BDR election?
The current configuration for FGT_3 shows that the OSPF interface for port2 is set to 'point-to-point' network type, which does not support DR/BDR election and is typically used for direct connections without other devices in between. To ensure FGT_3 can establish OSPF neighbors on a LAN segment without affecting the DR/BDR election, the network type should be set to 'broadcast' or left to the default configuration. This can be achieved by modifying the network type to 'broadcast' as shown in option A.
Correct: B
A priority value of 0 means that the routing device never becomes the designated router. A value of 1 means that the routing device has the least chance of becoming a designated router.
why not D
Correct: B