nse7_led-70 Exam - Question 22

Question

Refer to the exhibits.

Examine the troubleshooting outputs shown in the exhibits.

Users have been reporting issues with the speed of their wireless connection in a particular part of the wireless network. The interface that is having issues is the 2.4 GHz interface that is currently configured on channel 6.

The administrator of the wireless network has investigated and surveyed the local RF environment using the tools available at the AP and FortiGate.

Which configuration would improve the wireless connection?

Examice · Accepted Answer

To improve the wireless connection, it is best to change the AP 2.4 GHz channel to 1. This is because channel 1 has a lower RSSI total and a higher RF score compared to channel 6, indicating that it would provide better performance. Also, channel 1 is part of the non-overlapping channels (1, 6, and 11) which helps in minimizing interference and overlapping issues, making it a suitable choice.

ZengIT · Answer

Channel 9 utilization is only 1%, indicating that there is a significant amount of idle time on this channel.

Wallsee · Answer

for 2.4G, channel 1, 6 , 11 are working in a non-overlapping bundle. Assuming there is no change on channel on other areas, only channel 1 and 11 should be chose. In this case, since channel 1 has lower RSSI total and better RF-Score(higher) , So, I chose channel 1.

kinge2 · Answer

B correct as per study guide page 444

nse7_led-70 Exam - Question 22

Discussion