What is the slave device connected to the secondary IDE controller on a Linux OS referred to?
What is the slave device connected to the secondary IDE controller on a Linux OS referred to?
The naming convention for devices connected to IDE controllers in Linux follows a specific pattern. The primary master is referred to as 'hda', the primary slave as 'hdb', the secondary master as 'hdc', and the secondary slave as 'hdd'. Therefore, the slave device connected to the secondary IDE controller is referred to as 'hdd'.
Option B: ide0 = primary master = hda ide1 = primary slave = hdb ide2 = secondary master = hdc ide3 = secondary slave = hdd
hdb. In Linux, the slave device connected to the secondary IDE (Integrated Drive Electronics) controller is referred to as hdb, while the master device is referred to as hda. hdc and hdd are typically used to refer to devices connected to additional IDE controllers or to SATA (Serial ATA) devices.
/dev/hda is the first drive (master) on the first IDE controller and /dev/hdd is the second (slave) drive on the second controller (the fourth IDE drive in the computer).
ide3 = secondary slave = hdd
Secondary IDE Master HDC Secondary Slave HDD. Elb is a good explanation. B is correct
In Linux, the slave device connected to the secondary IDE (Integrated Drive Electronics) controller is referred to as hdb, while the master device is referred to as hda. hdc and hdd are typically used to refer to devices connected to additional IDE controllers or to SATA (Serial ATA) devices.