After installing the Vault, you need to allow Firewall Access for Windows Time service to sync with NTP servers 10.1.1.1 and 10.2.2.2.
What should you do?
After installing the Vault, you need to allow Firewall Access for Windows Time service to sync with NTP servers 10.1.1.1 and 10.2.2.2.
What should you do?
The appropriate step is to edit DBParm.ini to add the configuration for allowing non-standard firewall addresses specifically for outbound UDP traffic. The correct format to do this is: AllowNonStandardFWAddresses=[10.1.1.1,10.2.2.2],Yes,123:outbound/udp.
https://docs.cyberark.com/Product-Doc/OnlineHelp/PAS/13.0/en/Content/PAS%20INST/following-vault-Installation.htm#ConfiguretimesynchronizationontheVaultServerusingNTP
The answer is A. as the AllowNonStandardFWAddresses parameter only needs to be configured for outbound UDP traffic to the time server in order for NTP to work. https://docs.cyberark.com/PAS/Latest/en/Content/PAS%20INST/following-vault-Installation.htm?tocpath=Installation%7CInstall%20PAM%20-%20Self-Hosted%7CCyberArk%20Digital%20Vault%20installation%7CInstall%20a%20Primary-DR%20Environment%7C_____7#:~:text=firewall%20(machine/environment).-,Configure%20time%20synchronization%20on%20the%20Vault%20Server%20using%20NTP,-The%20Vault%20must
The answer is A. https://docs.cyberark.com/Product-Doc/OnlineHelp/PAS/12.6/en/Content/PAS%20INST/following-vault-Installation.htm?tocpath=Installation%7CInstall%20PAM%20-%20Self-Hosted%7CCyberArk%20Digital%20Vault%20installation%7CInstall%20a%20Primary-DR%20Environment%7C_____7
A is correct