SIMULATION -
Users are unable to access files on their department share located on file server 2. The network administrator has been tasked with validating routing between networks hosting workstation A and file server 2.
INSTRUCTIONS -
Click on each router to review output, identify any issues, and configure the appropriate solution.
If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.
Router A: Problem found: Yes Destination Prefix: 10.0.5.0 Destination Mask: 255.255.255.0 Interface: Gi1 Router B: Problem Found: Yes Destination Prefix: 10.0.1.0 Destination Mask: 255.255.255.0 Interface: Gi2 Router B: nothing to do, all good
router B all good or router C?
Router c is all good
This answer seems perfect. Router A is unaware of the 10.0.5.0/24 network and Router B is unaware of the 10.0.1.0/24 network. Both need to be added. Interfaces are correct. Good job
How is the mask figured out?
Router c is all good
Passed my exam Yesterday, this was the first pbq but different IPs
Were they the same answers as the top rated comment?
Does anyone know the complete answer to the exercise?
It seems as if Router B isnt detecting the Sub Network that Workstation A is within, (10.0.1.0/24), given the Information we have. So, a static route configuration to 10.0.1.0 on Gi2, might be need as well as the static route needed for the File 2 server and Router A. Also I might be wrong, but Router C looks like it is having a duplicate IP issue between its Gi2 and Gi1, but I don't know how applying more static routes will solve that conundrum.
router A is missing the 10.0.5.0/24 network. I built this lab in packet tracer to verify. router C is correct. It has static routes that include a larger address space to send to the correct interface. router b has a default route sending it to the correct interface.
fixing my mistake. router b needs a default route for the 10.0.1.0 traffic on interface2. the default route on router b is for sending traffic outbound
fixing my mistake. router b needs a default route for the 10.0.1.0 traffic on interface2. the default route on router b is for sending traffic outbound
Can someone explain the answer to me please?
There is a missing destination route from router a to filer server 2 which is 10.0.5.0/24. Bet ask is 255.255.255.0 for /24 also from router B to workstation A there’s also a missing route in the terminal for 10.0.1.0/24. Router C is good because it has the necessary routes between A and B. Interface showed from Router A is Gi1 to Filer Server and Gi2 from Router B. Hope this helps.
Meant to say subnet mask not bet ask, sorry autocorrection
Meant to say subnet mask not bet ask, sorry autocorrection
Anyone can confirm please if this Simulation exists, it's the same as Network+ n10-008!!
My friend took the 009 a few months ago. He said he saw this one on his test.