DRAG DROP -
Refer to the exhibit. Drag and drop the credentials from the left onto the remote login information on the right to resolve a failed login attempt to vtys. Not all credentials are used.
Select and Place:
Exam 300-410 All QuestionsBrowse all questions from this exam
Question 152
Correct Answer:
Discussion
AliMo123
answers are correct "The command “aaa authentication login default none” means no authentication is required when access to the device via Console/VTY/AUX so if one interface does not specify another login authentication method (via the “login authentication …” command), it will allow to access without requiring username or password. In this case VTY 1 does not specify another authentication login method so it will use the default method (which is “none” in this case)."
Alexloh
When you enable aaa new-model the command 'login authentication default' gets applied to the vty lines. “aaa authentication login default none” also meant no authentication require.
Eric0_0
Given answer is correct. If aaa new-model is NOT configured. The vty password will become effective.
studybuddy10
tested on 15.7 code - given answer is correct, user pass on VTY0, no user or pass on VTY1
Baderkhalouf
In line VTY 1, there is a password LetMeIn. Test on Cisco routers.
AliMo123
under VTY1, there is no login command, so it goes with default which is None in aaa authentication command
MP_iBGP
Answer is correct !
SeMo0o0o0
correct
Gramterre
provided answer is correct, labbed it
Calyfas
Given answer is correct.
OakA1
This is a good link for a reference https://www.cisco.com/c/en/us/support/docs/ios-nx-os-software/authentication-authorization-accounting-aaa/200173-Verify-AAA-behaviour-when-login-local.pdf