Refer to the exhibit. Hosts FC1, PC2; and PC3 must access resources on Server1. An engineer configures NAT on Router R1 to enable the communication and enters the show command to verify operation. Which IP address is used by the hosts when they communicate globally to Server1?
When hosts on the 10.10.10.0/24 network communicate to an external server, their addresses are translated by the NAT device (Router R1). The 'Inside Global Address' is the IP address that represents one or more inside local IP addresses to the outside world. In this case, the inside global address used is 155.1.1.1, which is evident from the NAT translation table on Router R1. Thus, the IP address used by the hosts when they communicate globally to Server1 is 155.1.1.1.
Read the question word by word again. They asked "Which IP address is used by the HOSTS when they communicate globally to Server1?" Hosts are these 3 PCs, and they use only the server public (global) IP, they don't need to know anything about what is going on on the router. The answer is D
The server has 155.1.1.5, no cummunication would be possible then...
"Which IP address is used by the hosts when they communicate globally to Server1?" I would focus on the internal host IPs not the server IP. (The question is about NAT.) so "B"
The inside Global address (155.1.1.1)
Not sure what the debate here is. Server 1 is 155.1.1.5 the 10.10.10.0/24 network NATs to 155.1.1.1 which then connects to 155.1.1.5... The question asks which IP address is USED BY THE HOSTS when they communicate A lot of you need to learn to read the question
Ok let me decipher this for you guys: "Which IP address is used" "by the hosts" (This has to me 155.1.1.1, it cannot be 155.1.1.5 because Inside Hosts are unable to translate to Remote Routers) "WHEN" (The word WHEN is also a given point) they communicate globally to Server1? (They communicate globally with the Inside Global Address to reach the Outside Global Address. I really hope this helps you
The Inside-Global IP address is used with random Port-numbers
Poor wording, they are trying to say inside global IP.
B is correct
B is correct
B for sure
This question is so badly worded that even C would apply in this case. I'm confident this isn't even an actual exam question as it's in no other dump on the whole internet.
Wording is awful and it's ambiguous. Exactly how a good engineer does NOT communicate a problem or question.
As usual the wording is horrible, and is how you look at it. Going with D
After looking at this again. I am now choosing B
Wording is awful and it's ambiguous. Exactly how a good engineer does NOT communicate a problem or question.
The answer is D read carefully..."wich ip uses GLOBALLY the hosts..." Regards
sorry , the correct is B
B is correct
its B. the inside glbalis the public IP you should use.
GLOBALLY by HOSTS 155.1.1.5
This is from a host perspective. I thing the answer is d.