Refer to the exhibit. An engineer configured SNMP in R1 to be able to save and upload configurations to the SNMP server but failed when they tried to backup R1 configuration on the server. Which configuration resolves the issue?
Refer to the exhibit. An engineer configured SNMP in R1 to be able to save and upload configurations to the SNMP server but failed when they tried to backup R1 configuration on the server. Which configuration resolves the issue?
The current configuration in the diagram indicates the use of access-list 66 for SNMP and the TFTP server. The command 'snmp-server tftp-server-list 66' correctly configures the device to use access-list 66 for TFTP operations. This ensures that the SNMP server can save and upload configurations using the TFTP server specified by the access list.
Seem a valid command: WAN(config)#snmp-server tftp-server-list ? <1-99> IP standard access list