An engineer must use Cisco ISE profiler services to provide network access to Cisco IP phones that cannot support 802.1X. Cisco ISE is configured to use the access switch device sensor information system-description and platform-type to profile Cisco IP phones and allow access. Which two protocols must be configured on the switch to complete the configuration? (Choose two.)
To complete the configuration of Cisco ISE profiler services for providing network access to Cisco IP phones that do not support 802.1X, the access switch must be configured to use SNMP (Simple Network Management Protocol) and CDP (Cisco Discovery Protocol). SNMP is essential for network management and monitoring devices, allowing ISE to collect system-description and platform-type information. CDP, specific to Cisco devices, helps in gathering detailed information about connected Cisco IP phones. Together, these protocols enable effective profiling and network access control.
A Device Sensor is a feature of access devices. It allows to collect information about connected endpoints. Mostly, information collected by the Device Sensor can come from these protocols: CDP LLDP DHCP https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/200292-Configure-Device-Sensor-for-ISE-Profilin.html