Refer to the exhibit. Packets received by the router from BGP enter via a serial interface at 209.165.201.10. Each route is present within the routing table. Which interface is used to forward traffic with a destination IP of 10.10 10 24?
Refer to the exhibit. Packets received by the router from BGP enter via a serial interface at 209.165.201.10. Each route is present within the routing table. Which interface is used to forward traffic with a destination IP of 10.10 10 24?
When selecting a route for forwarding traffic, a router prioritizes routes based on administrative distance (AD) and metric. EIGRP and OSPF are two different routing protocols. EIGRP has a lower AD (90) compared to OSPF (110). Among the routes for the 10.10.10.0/24 network listed with the EIGRP protocol, the route with the lowest metric value is chosen. The routes are via F0/10, F0/11, and F0/12 with metric values of 1441, 144, and 1441 respectively. Therefore, the route via F0/11, which has the lowest metric of 144, is used to forward traffic to the 10.10.10.0/24 network.
BEAUTIFUL QUESTION! Better than the Cisco tricky questions that seem made for a SAW movie.
Of course B because the router firt choose EIGRP Instead OSPF , then , because all prefix length is equal , router choose to lowest AD
metric is lower than 1441
B. Metric is Small.
BBBBBBBB
Dear Danaah, When installing to routing table is AD and Metric Only When choosing a route from routing table is Longest Prefix, AD and Metric can play a role Since the question stats based on routing table means now we have to consider 3 factors(longest prefix, AD and Metric) however all are /24 so longest prefix is out of the question. Now comes the tricky part If there are 2 or more routes to the same destination using different protocol is AD If there are 2 or more routes to the same destination using same protocol is Metric In this case example, OSPF route via F0/13 and EIGRP route via F0/11 are viable options however they ask to choose 1 so in the answer sheet is EIGRP route via F0/11 available thus being the answer.
metric looks confuse A & C 1441 B 144
lowest metric is correct
could you please explain how to solve this question in detail please?
Its easy, first find the lowest AD then the lowest metric.
EIGPR=90 low AD=144 OSPF=110
144 is metric no AD the AD =90
is the question helps to pass CCNA exam
B is correct