Refer to the exhibit. Customer_A asked ISP_A to connect two offices via an MPLS L3 VPN. Customer_A is currently using only the default route toward ISP_A. The engineer at ISP_A already configured the ip route vrf Customer_A 172.16.10.0 255.255.255.0 10.10.10.1 command on R1. Which action completes the configuration?
To complete the configuration, the commands required are 'redistribute static' and 'redistribute connected' on R1. Customer_A is using static routes, and these routes need to be redistributed into BGP for them to propagate across the MPLS L3 VPN. Therefore, option A is the correct action to complete the configuration.
A is correct.
It's C, redistribution of static route isn't required since a default route is configured on both CE routers
Any other routing protocols used, other than BGP, with Customer, we will need to redistribute it into BGP. Thus A seems correct.
B = no C = no https://networklessons.com/cisco/ccnp-route/cisco-evn-easy-virtual-network#:~:text=EVN%20supports%20route%20replication%20which%20%E2%80%9Creplicates%E2%80%9D%20routes%20from%20one%20VRF%20to%20another.%20It%20doesn%E2%80%99t%20require%20RDs%20and%20BGP%20so%20the%20configuration%20is%20a%20bit%20simpler. D = no Answer = A (closest to making sense)
D Seems more like it. route-replicate is for EVN shared services and not for mpls VPN. Another terribly worded question
Sorry guys D does not make sense either
A tabela de roteamento global não participa do roteamento do cliente.