Refer to the exhibit. The DHCP server and clients are connected to the same switch. What is the next step to complete the DHCP configuration to allow clients on
VLAN 1 to receive addresses from the DHCP server?
Refer to the exhibit. The DHCP server and clients are connected to the same switch. What is the next step to complete the DHCP configuration to allow clients on
VLAN 1 to receive addresses from the DHCP server?
To complete the DHCP configuration and allow clients on VLAN 1 to receive addresses from the DHCP server, it is necessary to configure the interface connected to the DHCP server as trusted. This is done by entering the 'ip dhcp snooping trust' command on that interface. By marking the interface connected to the DHCP server as trusted, the switch can securely receive DHCP responses and assign IP addresses to clients. Without this configuration, the DHCP server's responses would be discarded by the switch's DHCP snooping feature, preventing clients from receiving IP addresses.
If a Layer 2 LAN port is connected to a DHCP server, configure the port as trusted by entering the ip dhcp snooping trust interface configuration command. https://www.cisco.com/en/US/docs/general/Test/dwerblo/broken_guide/snoodhcp.html#wp1073367
At times you get the answer by eliminating options that you know can never be right.
C is correct