The configuration shown in the exhibit is creating a NAT pool with a range of IP addresses from 10.1.1.0 to 10.1.1.50 with a subnet mask of 255.255.255.0. This is indicative of setting up a dynamic NAT address pool, where a set of IP addresses can be used for dynamic NAT translations. Static NAT would involve assigning a single IP address statically mapped to a single destination, which is not the case here. A DHCP pool would use DHCP commands, and PAT (Port Address Translation) would typically involve specifying a single external IP address shared by multiple internal IP addresses differentiated by port numbers.