An engineer must collect all Cisco CleanAir alarms in a central location for archival purposes. Which device is configured for collection?
An engineer must collect all Cisco CleanAir alarms in a central location for archival purposes. Which device is configured for collection?
Cisco Prime Infrastructure is the device used to collect all Cisco CleanAir alarms in a central location for archival purposes. It is specifically designed for network management and provides historical data and reports, which is essential for archival purposes.
I am going to say "b" as mentioned. On a 9800 WLC, APs are shown in real time, the Air Quailty report are on APs at that moment. Once an AP goes down you can no longer find it on the WLC. You have to then go to Prime or Catalyst Center to view history information.
But they do not ask where do would you go to get the report, the question is which device collects the data, so I think D perhaps seeing that the controller collects the data.
Might be D according to the following: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-3/config-guide/b_cg83/b_cg83_chapter_011001.html "Role of the Cisco Wireless LAN Controller in a Cisco CleanAir System Collects and processes air quality reports from the access point and stores them in the air quality database. The Air Quality Report (AQR) contains information about the total interference from all identified sources represented by the Air Quality Index (AQI) and summary for the most severe interference categories."