An engineer must enable onboarding of on-premises devices by using activation codes to a Cisco UCM server The engineer activated the Cisco Device Activation Service and set the default registration method to use the codes. Which action completes the configuration?
To complete the configuration for onboarding on-premises devices using activation codes, the engineer must set the Enable Activation Code enterprise parameter to True. This action ensures that the system recognizes and processes the activation codes.
C seems correct according to this doc: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/12_5_1/systemConfig/cucm_b_system-configuration-guide-1251/cucm_b_system-configuration-guide-1251_chapter_01011100.html#task_1D98A6EBE82277D056446584CEF13597
C is correct: Provision phones with activation code requirement. Following are two provisioning example options: Add Phone with Activation Code Requirement Add Phones with Activation Codes via Bulk Administration
C is not correct since another 2 more steps which are Create CSV File with New Phones & Insert Phones are required to "complete" the configuration while Add Phone with Activation Code Requirement is sufficient on its own.
D. is incorrect. It says that manually provision new phones THAT HAVE an activation code requirement, rather you must to configure and provision manually the phone to get the activation code. First is to provision the phone and then get the activation code created when you save the phone to the database.
There are two ways to achieve this: 1. Add Phone with Activation Code Requirement 2. Add Phones with Activation Codes via Bulk Administration Option 1 is a manual process. Option 2 is preferable, however just creating a Template does not "Complete" the process. So, D cannot be correct.
There are two ways to achieve this: 1. Add Phone with Activation Code Requirement 2. Add Phones with Activation Codes via Bulk Administration Option 1 is a manual process. Option 2 is preferable, however just creating a Template does not "Complete" the process. So, D cannot be correct.
D. is incorrect. You must first to provision and to add the phone to the database to get the activation code. Also it is impractical to add many devices manually. Answer is C. Reference: System Configuration Guide for Cisco Unified Communications Manager, Release 12.5(1) CHAPTER 40: Device Onboarding via Activation Codes https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/12_5_1/systemConfig/cucm_b_system-configuration-guide-1251.pdf
1.Activate the Device Activation Service 2.Set Registration Method to use Activation Codes 3.Add Phone with Activation Code Requirement Manually or 4.Add Phones with Activation Codes via Bulk Administration 5.Activate Phones