Which setting is required in order to connect an appliance with 40Gbps downlink interface and DAC to the Orchestrator MHO-140?
Which setting is required in order to connect an appliance with 40Gbps downlink interface and DAC to the Orchestrator MHO-140?
To connect an appliance with a 40Gbps downlink interface to an Orchestrator MHO-140, it is necessary to change the QSFP mode on the Orchestrator from 100Gbps to 40Gbps to match the appliance's downlink interface speed. This ensures compatibility between the devices and enables successful communication.
Answer could be C: Changing Uplink to Downlink should still cause a speed mismatch. While not ideal, changing the backplate speed to match the 10Gb of the 10Gb downlink port of the MHO-140 would be the only answer that would allow it to connect properly. Please correct me if I am wrong.
Answer is B: " It is possible to change the port type (Management, Uplink, and Downlink)..." QSFP+ are transceiver modules for 40GbE fiber ports and not for 100GbE ports https://sc1.checkpoint.com/documents/Appliances/GSG_Maestro/EN/Topics/MHO-140-Front-Panel.htm?tocpath=Hardware%20Components%7C_____5
Answer is B: " It is possible to change the port type (Management, Uplink, and Downlink)..." QSFP+ are transceiver module for 40GbE fiber ports not 100GbE https://sc1.checkpoint.com/documents/Appliances/GSG_Maestro/EN/Topics/MHO-140-Front-Panel.htm?tocpath=Hardware%20Components%7C_____5
select A