What is the command to check the status of the SmartEvent Correlation Unit?
What is the command to check the status of the SmartEvent Correlation Unit?
The command to check the status of the SmartEvent Correlation Unit is 'cpstat cpsead'. This command is used to verify various parameters such as whether the process is alive, if it is connected to the SmartEvent server, the number of logs processed, and the status of the disk space. This command is applicable to multiple versions and provides detailed status information about the SmartEvent Correlation Unit.
for 80.30: [Expert@Lab_MGMT_80_30:0]# cpstat cpsead Process is alive: 0 Connected to SEM: 0 Logs Processed: 0 No Free Disk Space: 0 Process Status: 2 Short Description: CPSEAD not running Long Description: CPSEAD not running - process appears to be down
For R80.40: [Expert@MgmtR80_40:0]# cpstat cpsead Process is alive: 1 Connected to SEM: 0 Logs Processed: 0 No Free Disk Space: 0 Process Status: 0 Short Description: Not connected to SEM Long Description: Event distributor is not connected.
This answer is adequate only for Version R77, R77.10, R77.20, R77.30
Nop, it´s still working on 81.10
cpstat cpsead
This command works in SMS "cpstat cpsead" on R80.30 version provided that you have enabled the required software blade in Mgtm server i.e. SmartEvent Server and Smartevent Corealtion unit "