True or False: When ZTP has been placed in cancel mode, you must issue the write memory command to prevent ZTP from triggering again.
True or False: When ZTP has been placed in cancel mode, you must issue the write memory command to prevent ZTP from triggering again.
When ZTP (Zero Touch Provisioning) has been placed in cancel mode, issuing the 'write memory' command is necessary to save the current configuration to the startup configuration. If you do not save the configuration, the device will revert to its default state upon reboot, which will reactivate ZTP. Therefore, to prevent ZTP from triggering again after cancellation, you must save the configuration using the 'write memory' command.
B is correct To cancel ZTP mode, login as admin and type zerotouch cancel. This will trigger an immediate reload of the switch, after which the switch will be ready to configure manually. At this point, if you ever erase the startup-config and reload, the switch will edn up ZTP mode again.
I thoutgh this again. I think answer is A corret. Because after booted switch, there is no startup config. but ztp cancel one time command. if device reboot again, ztp will be activated since there is no startupconfig. to prevent it you have to write memory to create startup config
ztp cancel provides only one-time cancellation.If you reboot again the device, ztp will be enabled. Also, as soon as you ztp cancel, device will be reboot. Answer b
A is true