Netapp NS0-180 Exam Questions

Question 6 of 94

You have just configured the customer's first SVM with a LIF IP 10.0.0.10/24. The customer's DNS IP address is 172.16.0.250 and you are unable to ping it from the NetApp storage system, but you are able to ping the gateway and everything else works.
In this scenario what is the problem?

You need to have the DNS server on the same subnet as the LIF IP address.

You need to add a static gateway to the LIFs routing group.

You need to have the customer check the cable.

You need to add an IPspace and domain broadcast to the port.

Correct Answer: D

Question 7 of 94

You are installing a 4-node cluster with two CN1610 switches. Your co-worker is setting up the switches, but accidentally deletes the current configuration.
According to NetApp, what is the recommended way to restore the configuration?

Install only one switch.

Manually configure the ports as they are designated in the CN1601 and CN1610 Switch Setup and Configuration Guide.

Reload the same reference file to the switch.

Copy the configuration from a switch that is working.

Correct Answer: D

Question 8 of 94

Which switch vendor is supported for the cluster network switches?

Juniper Networks

Cisco

Brocade

Hewlett-Packard

Correct Answer: B

Question 9 of 94

According to NetApp, which two scenarios are recommended for a RAID-DP aggregate in clustered Data ONTAP 8.3? (Choose two.)

three or more disks if it is a data aggregate

three or more disks if it is a root aggregate

two or more disks if it is a root aggregate

five or more disks if it is a data aggregate

Correct Answer: B, D

Question 10 of 94

Regarding clustered Data ONTAP 8.3, what happens to the roles of the on board ports, HBAs, and NICs?

These roles are assignet when LIFs are created.

These roles are assigned based on the controller type.

These roles are predefined and must be changed before creating your LIFs.

The roles are divided into two categories: Data Management and Node Management.

Correct Answer: A